Page 1 of 1

3 1/2" gauge track.

Posted: Mon Jul 15, 2019 12:36 pm
by dunalastairv
As a complete novice in this field, can anyone direct me to suppliers of 3 1/2" gauge, (1:16) 4-hole rail-chairs, and steel bull-head rail? I'm hoping to make up my own fine-scale length of track to display my Dunalastair III model on. The sleepers themselves should present no problem in scaling down from the prototype.

Thanks in advance, Michael.

Re: 3 1/2" gauge track.

Posted: Mon Jul 15, 2019 4:39 pm
by Mike 1
No. But Steam Workshop do nice 2-bolt chairs and Shapeways have GER 4-bolt chairs by "Off the Rails" which they could doubtless scale up to 3 1/2".

Or, there are some very capable CAD users on this forum - somebody might draw out a proper CR chair and have it solid printed, then cast. Might not be as expensive as you think. That's what I did for LNWR chairs in 2 1/2in gauge.

Mike

Re: 3 1/2" gauge track.

Posted: Sat Mar 28, 2020 10:21 pm
by Mike 1
Michael,

I note elsewhere that you were researching the builder of the model colliery. You may be interested that three of the wagons are currently on ebay. Drop me a note if you are interested as you'll never find them on ebay otherwise!

Mike